10 Myths Your Boss Is Spreading About Repairs To Upvc Windows
10 Myths Your Boss Is Spreading About Repairs To Upvc Windows
Blog Article
Repairs to uPVC Windows
uPVC windows are a great option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they don't rust or rot.
Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and also improve the efficiency of energy.
1. Broken Glass
If the glass in your window is damaged, it can cause a great amount of damage to your home, which can make it very dangerous and potentially fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good condition.
Single-pane windows are fairly simple to replace, and they typically fit into frames of the past easily. However, if windows with double panes are secured by internal beading, it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this situation you'll need to source some plastic spacers that will aid the new pane in being able to fit perfectly into the frame of the window.
If you plan to try to remove the window panes by yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you start working on the glass to ensure that any shards will fall onto the cloth instead of landing on the floor where they can be trampled upon and cause further damage.
After the glass has been removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the property until a professional can come out and fix the window. This also serves as an obstruction to prevent intruders from getting into your home. If the distance between the door and the window is substantial, you may prefer an alarm system that has an opening. This will provide the best of both.
2. Sagging
uPVC is durable, energy-efficient and affordable alternative to timber sash windows. As time passes, they may be affected by a variety of issues such as sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It is crucial to act immediately if you notice your uPVC windows are sliding.
Repositioning the hinges could help fix a window that is sliding. To do this, you'll need open the window to get to the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close your window and check for fit. If you're satisfied with the size of the window, you can tighten screws to keep them in the right position.
If you are unable to reposition the hinges, you could have to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and secure from draughts.
uPVC handles could also become loose. The majority of the time it is due to screws that have come loose over time. However, it could occur because the handle mechanism has worn out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. First, you'll need to shut the window and then perform an experiment fitting. The corner joints of the sash must windows fitting near me align with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into position.
3. Water Leaks
If you awake to wet floors and mouldy walls every time it rains it's crucial to take action. The leaks of water through windows could cause structural damage to your windows supply near me home and hinder your ability to control the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.
This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the problem the caulking that was used up might need to be removed before a fresh layer is applied. When it is time to uPVC repair, it is important to avoid 'over-caulking'. This will only make your window harder to clean and lower its energy efficiency.
Verify that the drainage holes do not have debris in them, and also that the sill pan is properly angled to allow the water to drain from the window. In more extreme instances, you may need to replace the window.
Moldy sills and rotten ones are another sign of water leakage. The is a fungus that thrives in damp conditions and can quickly spread across the home.
It is also important to note that if the leakage originates from the glass in your double glazed windows, it is more likely here to be a problem with the glass seal, rather than the frame or sagging. It is also possible to be fixed by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or are loose and open in a breeze it could be the hinges that are at fault. These are easily repaired by any DIYer who is skilled and are usually done within a few minutes.
Like any mechanical part hinges will wear out over time. The process of replacing a hinge on a window is essentially a simple process but it can be simpler if you have someone to help you hold the frame in place.
Verify that the uPVC hinges are closed and open in the proper direction. Check for the arrows on each hinge to determine which direction the window should be opened.
Window hinges that aren't working properly could be caused by improperly opening the window in a certain manner or because of poor installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be more than happy to give you suggestions.
Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We recommend using an oil that does here not contain solvents, like 3-in-1 Multi-Purpose oil. window doctors near me Regular lubrication will make the window easier to open and close. It also decreases the chance of windows getting stuck and stop corrosion. This should be done at least once a year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.
5. Draughts
Draughts can be caused by different causes. The hinges can also be unbalanced due to wear, causing a gap between the frame and sash. If they are damaged beyond repair, it may be necessary to get them re-aligned. The interlock, which is located on the hinge of the window, may be misaligned. Again, it may be possible to give them a good clean, but in some instances it could be necessary to get them replaced.
The next most common cause of draughts is the window seals, these can become worn down or damaged over time, and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping can help prevent draughts. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures and decrease draughts.
One of the most effective ways to cut down on drafts is to use an draught excluder. These are usually fabric tubes that are filled with some kind of filler. They can be placed on the top of your windowsill. They will help block out cold air and keep your home warm and cosy!
With a bit of regular maintenance and repair, your upvc windows will provide an excellent level of security and insulation for your home. It is crucial to recognise that all windows have a life span and there may come an point at which it is more cost-effective to replace them rather than fix them. If you are experiencing problems with your upvc windows, it's best to seek professional assistance as soon as you can.